Setup and connections – Kyocera DP-3600 User Manual
Page 34
Setup and Connections
1-
13
Setup and Connections
Set up the printer according to the following steps.
1.
Install the printer on the paper feeder. ............................................................................ Page 1-14
2.
Open the top cover. ........................................................................................................ Page 1-15
3.
Install the toner container. .............................................................................................. Page 1-16
4.
Close the top cover. ........................................................................................................ Page 1-19
5.
Adjust the paper guide on the paper feed cassette. ....................................................... Page 1-19
6.
Add paper. ...................................................................................................................... Page 1-22
7.
Open the paper stopper on the face-down tray (if required). .......................................... Page 1-24
8.
Open the face-up output tray (when the tray is being used). .......................................... Page 1-24
9.
Connect the printer to the computer. .............................................................................. Page 1-25
10.
Attach the power cord. .................................................................................................... Page 1-27
11.
Test the printer. ............................................................................................................... Page 1-28
12.
Test the interface with the computer. .............................................................................. Page 1-29
13.
Install the printer driver. .................................................................................................. Page 1-30