Kyocera DP-3600 - Manual (Page 129)

Resource Protection
2-61
Resource Protection
When you switch from the HP LJ 5M/5Si emulation to another, all downloaded fonts and macros are
lost. Resource protection preserves these PCL resources in memory so that they are intact when you
change the emulation back to HP LJ 5M/5Si.
By using the printer's >Resource prot., you can select from two resource protection modes as
follows:
>Resource prot.
Permanent
In this mode, the printer stores fonts, macros, symbol sets, etc. in memory that were downloaded as
permanent PCL resources. All temporary resources are lost when the emulation mode is changed
from HP LJ 5M/5Si to another or vice versa.
>Resource prot.
Perm / Temp
In this mode, the printer stores both permanent and temporary resources when the emulation mode is
changed from HP LJ 5M/5Si to another or vice versa.