Kyocera DP-3600 User Manual
Page 41
Chapter 1 Safeguards and Installing the Page Printer
1-
20
Paper feed cassette position
1.
Pull out the paper feed cassette until it stops.
2.
Open the paper feed roller located on the right side of the cassette until it stops as shown in the
figure.
3.
Next, adjust the position of the paper stopper located on the left side of the cassette. While
holding down the lever (green) on the paper guide, slide the paper stopper to the desired paper
size.
4.
Adjust the position of the paper guides located at the front and rear of the paper feed cassette.
Align the paper guides to the desired paper size by pressing the knobs (green) on the paper
guides so they slide.
: Paper Size Indicator Position
Paper Stopper
Paper Guide
Front Side
Paper Guide
Note: Be sure to remove the size
indicator plates which are
temporarily attached before
using the printer.