KORG Electronic Keyboard - Manual (Page 225)

EXi Program P0: Play 0–1: Main
215
Lower Drawbars
This shows the Lower drawbar settings.
Press this area to jump to the Drawbars page.
V/C On/Off
This shows whether the Vibrato/Chorus is turned on
or off for the Lower drawbars.
Press this area to jump to the Amp/Vibrato/Chorus
page.
EX Drawbars
This area shows the Lower EX drawbar settings. It will
only appear if the Drawbar Mode is set to EX.
Press this area to jump to the EX Drawbars page.
Upper
Upper Drawbars
This shows the Upper drawbar settings.
Press this area to jump to the Drawbars page.
Percussion
This section shows the Percussion Harmonic setting,
and whether or not Percussion is turned On.
Press this area to jump to the Percussion page.
V/C On/Off
This shows whether the Vibrato/Chorus is turned on
or off for the Upper drawbars.
Press this area to jump to the Amp/Vibrato/Chorus
page.
EX Drawbars
This shows the Upper EX drawbar settings.
Press this area to jump to the EX Drawbars page.
Rotary Speaker
Press anywhere in this area to jump to the Rotary
Speaker page.
Rotary Speaker On/Off
This shows the On/Off setting of the rotary speaker.
Mode Switch
This shows the rotary speaker’s Mode Switch
(Rotate/Stop) setting of the rotary speaker.
Speed Switch
This shows the rotary speaker’s Speed Switch setting
(Fast/Slow).
Common
The graphics along the right side of the screen show
the most important Common parameters, which are
shared by both EXi in the Program. This section will
always show the same parameters, regardless of which
EXi are being used.
Common Voice Assign Mode
This shows the voice assign mode of the Program–
either POLY or MONO.
Press this area to jump to the Program Basic page.
Common Step Sequencer
This shows a graphic overview of the Common Step
Sequencer.
Press this area to jump to the Common Step Sequencer
page.
Common LFO Graphic
This shows the waveform of the Common LFO.
Press this area to jump to the Common LFO page.
3 Band EQ Graphic
This shows the mid-sweepable 3-band EQ.
Press this area to jump to the EQ page.
IFX, MFX/TFX
Press the IFX area to jump to the IFX Routing page.
Press the MFX/TFX area to jump to the MFX Routing
page.
KARMA GE Name
This shows the name of the selected KARMA GE.
Press this area to jump to the GE Setup/Key Zones
page.