KORG Electronic Keyboard - Manual (Page 434)

Sequencer mode
424
REC 1, 2, 1/2, REC 3, 4, 3/4: The REC 1/2 or REC 3/4
buses will be recorded. Choose this if you want to
record only the audio input while hearing the
sequencer playback and your keyboard playing from
the L/R outputs. You can also mix several audio inputs
to the REC buses, or use the REC buses to mix the
direct sound from the audio inputs with the sound processed by insert effects, and record the result. For
more information, see the diagram “REC Source = REC
Bus 1, 2.”
If “Stereo Pair” is on, REC Bus 1 (3) is sent to odd-
numbered tracks, and REC Bus 2 (4) is sent to even-
numbered tracks.
Indiv.1…8, Indiv.1/2, Indiv.3/4, Indiv.5/6, Indiv.7/8:
The Indiv.1/2–Indiv.7/8 buses will be recorded.
Similarly to when using the REC buses, you can choose
this when you want to monitor the L/R output while recording only the audio input. For more information,
see the diagram “REC Source = Indiv. 1, 2 (3, 4, 5, 6, 7,
8).”
If “Stereo Pair” is on and you’ve selected Indiv.1/2, the
Indiv. bus 1 will be sent to odd-numbered tracks, and
Indiv. bus 2 will be sent to even-numbered tracks.
STEREO
This is shown if “Stereo Pair” is on.
Play/Rec/Mute [Play, Rec, Mute]
Use this to mute an audio track, or to select the
recording tracks for multi-track recording. During
playback, or for single-track recording (normal
recording), it is possible only to select Play or Mute for
tracks (playback tracks) other than the recording track.
For multi-track recording, tracks can be set to Play, Rec,
or Mute. The setting will alternate each time you press
the Play/Rec/Mute button.
Play: The track will play.
Rec: This will be displayed during single-track
recording (normal recording). It cannot be selected.
When you use multi-track recording (the Preferences
page “Multi REC” is on), select REC for the tracks that
you wish to record. You can specify REC for up to four
tracks.
Mute: The track will be muted (silent).
Level Pan
L/R
Bus
Insert
Effects
Insert
Effects
REC Bus = 1,2
Audio CD
REC Source
= REC Bus 1 (2)
REC
1,2, 3, 4
Indiv.
1,2,3,4,5,6,7,8
Sequencer Playback
Keyboard
Bus = L/R or IFX1-12
CLIP !
Bus = L/R or IFX1-12
Insert
Effects
Level Pan
Recording
HDR Track (Mono)
Audio Track selected in
Track Select
REC Source
REC1
L/MONO
R
AUDIO OUTPUT
HEADPHONES
[x] Source Direct Solo
Total
Effects
Master
Effects
Monitor
If REC Source is set to REC Bus 1 or 2, setting the Audio Track REC Bus to 1 or 2 will
automatically cause the Rec input to be muted in order to avoid a feedback loop. If
you route the signal to IFX, the same thing will occur if you send the post-IFX signal to
REC Bus 1 or 2.
Level Pan
Insert
Effects
Insert
Effects
L/R
Bus
REC
1,2, 3, 4
...
Indiv.
1,2,3,4,5,6,7,8
INDIV.1
INDIV.2
AUDIO OUTPUT
Audio CD
REC Source
= Indiv.1, 2 (3, 4, 5, 6, 7, 8)
CLIP ! Recording (Multi REC)
Bus = L/R or IFX1-12
Insert
Effects
Level Pan
HDR Track (Mono)
HDR Track (Mono) Indiv.1
Indiv.2
REC Source
Set Play/Rec/Mute
to Rec
Sequencer Playback
Keyboard
Bus = L/R or IFX1-12
L/MONO
R
AUDIO OUTPUT
HEADPHONES
[x] Source Direct Solo
Total
Effects
Master
Effects
Monitor
If the Bus Select of an audio track is set to Indiv. 1 or 2, the Rec input will
automatically be muted in order to avoid a feedback loop. If you route the signal to
IFX, the same thing will occur if you send the post-IFX signal to REC Bus 1 or 2.