Output, Limiter - multitap delay, Routing – KORG Electronic Keyboard User Manual

Page 875: Limiter, Multitap delay, Exciter - comp, Limiter - multitap delay 125: exciter - comp

Advertising
background image

Mono-Mono Serial 124: Limiter - Multitap Delay

865

Resonance

[+/–100]

Sets the resonance amount. p.805.

Output Mode

[Normal, Wet Invert]

Selects whether the phaser output is mono or pseudo-
stereo. For more information, see “Output Mode” on
page 857.

When Routing is set to Phaser

Comp, Output Mode

will automatically be set to Normal.

Wet/Dry

[Dry, 1:99…99:1, Wet]

Sets the phaser effect balance. p.780, p.804.

Source

[Off…Tempo]

Selects the phaser’s Wet/Dry modulation source.

Amount

[+/–100]

Sets the phaser’s Wet/Dry modulation amount.

OUTPUT

This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.

124: Limiter - Multitap Delay

This effect combines a mono limiter and a multitap
delay. You can change the order of the effect s.

Routing

Routing

[Limiter

Mt.Delay, DLY Limiter]

Switches the order of the limiter and multitap delay.

LIMITER

Ratio

[1.0 :1…50.0 :1, Inf :1]

Sets the signal compression ratio. p.765.

Threshold [dB]

[–40…0]

Sets the level above which the compressor is applied.
p.766.

Attack

[1…100]

Sets the attack time. p.766.

Release

[1…100]

Sets the release time. p.766.

Gain Adjust [dB]

[–Inf, –38…+24]

Sets the limiter output gain. p.766.

MULTITAP DELAY

Tap1 Time [msec]

[0.0…1360.0]

Sets the Tap1 delay time.

Tap2 Time [msec]

[0.0…1360.0]

Sets the Tap2 delay time.

Tap1 Level

[0…100]

Sets the Tap1 output level. p.832.

Feedback

[+/–100]

Sets the Tap2 feedback amount.

High Damp [%]

[0…100]

Sets the damping amount in the high range. p.829.

Wet/Dry

[Dry, 1:99…99:1, Wet]

Sets the multitap delay effect balance.

Source

[Off…Tempo]

Selects the multitap delay’s Wet/Dry modulation
source.

Amount

[+/–100]

Sets the multitap delay’s Wet/Dry modulation
amount.

OUTPUT

This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.

125: Exciter - Comp

This effect combines a mono exciter and a compressor.
You can change the order of the effects.

Left

Right

Wet / Dry

Wet / Dry

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out

+

Routing

Multitap Delay

Feedback

High Damp

Delay

(2)

(1)

Mt.Dly Wet / Dry

Limiter

Limiter

Gain Adjust

Envelope - Control

Left

Right

Wet / Dry

Wet / Dry

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out

+

Routing

Compressor

LEQ HEQ

EQ Trim

Comp

Output Level

Envelope - Control

Exciter

Exciter

Advertising