3: external 2, 3a: setup select, 3b: pads 1-8 – KORG Electronic Keyboard User Manual

Page 668: 1–3: external 2, 1–3a: setup select, 1–3b: pads 1–8, 1–3: page menu commands

Advertising

Global mode

658

1–3: External 2

This page lets you set up the drum pad assignments
for the Control Surface’s EXTERNAL mode. Each pad
can play a note, or send a Control Change (CC)
message, on any of the MIDI channels. For more
information, see “1–2: External 1” on page 656.

1–3a: Setup select

Setup

[000…127]

This selects the Global setup to edit.

1–3b: Pads 1–8

MIDI Channel (1–8)

[1…16, Gch]

This sets the MIDI Channel for the pad. Each can send
on a different channel, if desired.

Gch means that the pad will transmit on the Global
MIDI Channel, as set in Global mode. This allows you
to re-direct any number of sliders, knobs, switches, and
pads to a different channel at once, without editing the
individual controls.

Assign (1–8)

[Off, C-1…G9, CC#00…119]

Each pad can send either a MIDI note or a MIDI CC
message. When assigned to a CC, the pad sends a
value of 127 when it is pressed down, and a value of 0
when it is released.

Velocity (1–8)

[1…127]

The front-panel PAD MODE button switches the pads
between being velocity sensitive (so that the loudness
varies depending on how hard you hit the pad) and
playing a single, fixed velocity for each note (handy if
you want the same results every time, regardless of
how hard you play).

This lets you set the pad’s fixed velocity.

▼ 1–3: Page Menu Commands

The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.

• 0: Write Global Setting. For more information, see

“Write Global Setting” on page 682.

• 1: Dump Program. For more information, see

“Dump Program” on page 685.

• 2: Dump Combination. For more information, see

“Dump Combination” on page 685.

• 3: Dump Drum Kit. For more information, see

“Dump Drum Kit” on page 685.

• 4: Dump Wave Sequence. For more information,