List of key operations – KORG KPC-1 EFG User Manual
Page 30
30
List of key operations
Play mode (performing)
Recall a scene
Hold down the [SCENE] key and press a trigger pad [1]...[16]
Use the Roll function
Press the [ROLL] key
Use the Flam function
Press the [FLAM] key
Use the Hold function
Press the [HOLD] key
Transmit a program change
Hold down the [PROG CHANGE/WRITE/ALL PAD] key and turn the encoder
Transmit a message
Hold down the [MESSAGE/EXIT] key and press a trigger pad [1]...[8]
Fix the velocity value
Press the [FIXED VELOCITY/PRELOAD] key
Setting mode (editing)
Enter Setting mode
Press the [SETTING/ENTER] key
Return from Setting mode to Play mode
Press the [SETTING/ENTER] key
Cancel while editing
Press the [MESSAGE/EXIT] key
Save a scene
Hold down the [SCENE] key and press the [PROG CHANGE/WRITE/ALL PAD] key
Setting mode
Key
Trigger Pad
Pedal
X-Y Pad
Knob1/2
Flam
Roll
[NOTE/CC#/LEFT]
Note#[C-1...G9] /
Note#[C-1...G9] /
Message Type
Message Type
Interval Left
Speed Left
CC#[0...127]
CC#[0...127]
[No Assign/Pitch Bend
[No Assign/Pitch Bend
[0...255]
[40...240]
/After Touch/CC#]
/After Touch/CC#]
[MIDI CH/RIGHT]
MIDI CH
MIDI CH
Interval Right
Interval Right
[Disable/1...16]
[Disable/1...16]
[0...255]
[40...240]
[SW TYPE/POLARITY]
Switch Type
Switch Type
Polarity
Polarity
[Momentary/Toggle]
[Momentary/Toggle]
[Normal/Reverse]
[Normal/Reverse]
[REL . VAL./LOWER]
Release Value[0...127]
Release Value[0...127]
Release Value
Volume Lower
Expression Lower
(only if cc is assigned)
(only if cc is assigned)
[0...127/-128...127]
[1...127]
[1...127]
[VELOCITY/UPPER]
Velocity Curve(Note)
Velocity Curve(Note)
Volume Upper
Expression Upper
On Value[0...127] (cc)
On Value[0...127] (cc)
[1...127]
[1...127]
[PORT]
USB-MIDI Port
USB-MIDI Port
[PORT A/PORT B]
[PORT A/PORT B]