Konica Minolta Fax 9930 User Manual
Page 108
|
User’s Manual
93
What You Can Do While Sending a Fax
After your fax machine has finished scanning a document
into memory and while it is transmitting from memory, you
can:
1
Make copies.
2
Load another document and prepare it for transmission.
You can continue to load documents as long as memory
is available in your machine. When the first transmission
is complete, the next fax is automatically sent.
3
Enter the fax number before loading a document.
Why is this important?
Documents are placed FACE DOWN on the feeder of
your machine.
If the only record of the fax number you are dialing is
printed on the document being sent, it can be difficult to
remember the number. Entering the number before
loading the document allows you to see the number
when keying. Once the number is entered, place the
document (face down) on the feeder.
!
For situations 2 and 3,
TX Prep Activated displays for
2-3 seconds. Do not attempt to load documents during
this short time!