Konica Minolta Fax 9930 - Manual (Page 69)

|
Konica FAX 9930 54
Dial Parameter Settings
Redial Tries
Speed access no. 40.
This function controls how many times your machine
automatically redials a number that is busy or does not
answer.
Available settings are from 0 to 10 tries.
3 tries is the default setting.
Redial Interval
Speed access no. 41.
The function controls how long your machine waits between
each automatic redial attempt.
Available settings are from 1 to 6 minutes.
The default setting is 3 minutes between dialing attempts.
Auto Start
Speed Access no. 42.
With this function set to ON, the machine automatically
begins dialing as soon as a location is selected by pressing a
One-Touch key or by entering another Speed Dial number.
There is no need to press the Start key.
Available settings are ON and OFF.
ON is the default setting.
Dial Tone Detect
Speed access no. 43
This function allows your machine to wait for and detect a
dial tone before dialing. Set to ON, a dial tone must be
detected.
Available settings are ON and OFF.
ON is the default setting.