Konica Minolta Fax 9930 - Manual (Page 97)

|
Konica FAX 9930 82
Rejecting Unsolicited Fax Messages
Closed Network
Speed Access 21
If closed network is on, your machine will ONLY accept faxes
from numbers programmed as Speed Dial Numbers.
This keeps out unwanted faxes (such as advertising).
You can also set your machine to send faxes to ONLY the
numbers programmed as Speed Dial Numbers.
The Closed Network settings are:
•
Limited reception (RX)
•
Limited transmission and reception (TX/RX)
•
No limitations (OFF). This is the default setting.
! If Closed Network is set to TX/RX or RX, your machine
will ONLY accept faxes from numbers programmed as
Speed Dial Numbers.
Any numbers NOT programmed as Speed Dials will be
rejected by the fax machine.
Setting a Closed Network
1 Press Menu/Exit to enter the menu.
2 Input speed access number 21 (Closed Network); wait.
3 When Closed Network displays, press ᮢ or ᮡ to select
a setting, press Enter.
4 Press Menu/Exit to return to standby mode.