Konica Minolta Fax 9930 - Manual (Page 89)

|
Konica FAX 9930 74
Chain Dialing
Each fax number that you enter or program into your
machine can be up to 40 digits long. If you need to dial a
number with more digits, use the chain dial feature.
Creating a Chain Dial Number
! Print the Phone Directory before you begin
programming. See “Reports, Telephone Directory.”
This provides a reference of the speed dial numbers
already programmed.
1 Program the first 39 digits into a Speed Dial number.
See “Programming Speed Dial Numbers, Programming a
Speed Dial.”
2 Press the Plus (+) key (One-Touch key #39).
3 Program the rest of the number into a different Speed
Dial number.
Dialing the Chain Dial Number
1
Load the document to be faxed.
SELECT LOCATION displays.
2 Select the first Speed Dial Number programmed.
3 Wait until SELECT LOCATION displays.
4 When prompted, enter the second Speed Dial number.
5 Press the Start key to begin sending the fax.
! The remaining part of the number not programmed in
the first Speed Dial number can also be input manually
when prompted, using the numeric keypad (step 2).