Konica Minolta Fax 9930 - Manual (Page 167)

|
Konica FAX 9930 152
Restrict Access
Speed access no.19
This function controls whether or not machine operation is
restricted.
When set to ON (if restriction IDs have been programmed),
users must enter a password before being allowed access to
the machine’s functions.
When set to OFF, no password is required (even if restriction
IDs have been programmed).
Available settings are ON and OFF.
The default setting is OFF.
ECM Function
Speed access no. 20
The error correction mode (ECM) function is provided to
improve communications in areas where telephone line
conditions are very poor.
Available settings are ON and OFF.
The default setting is ON.
Sender ID Switch
Speed access no. 23
This function determines if the Sender ID is to be printed on
the transmitted fax. When set to ON, the ID is included on
the fax.
Available settings are ON and OFF.
The default setting is ON.
! In the United States, FCC regulation states that fax
machines must identify the sender and the telephone
number of the sender on each page of every fax sent.