Konica Minolta Fax 9930 - Manual (Page 169)

|
Konica FAX 9930 154
T/F Timer Prg.
Speed access no. 62
When set to T/F, the machine will automatically distinguish
between incoming voice and fax communications. The T/F
timer controls how long the machine waits for the call to be
answered before switching to FAX mode.
Available settings are 20 and 35 seconds.
The default setting is 35.
CNG Count
Speed access no. 65
When set either in the T/F or TAD modes, the machine
detects the type of signal (calling tone, CNG) sent from the
remote location and initiates fax reception if required. This
function sets the CNG detection number.
The available settings are 1-5 times (numeric keypad input).
The default setting is 1.
Ring Response
Speed access no. 66
This function controls how long the machine waits before
answering an incoming call.
The available settings are 1 ring, 5, 10, 15 and 20 seconds.
The default setting is 1.