Konica Minolta Fax 9930 - Manual (Page 43)

|
Konica FAX 9930 28
Safety
Installation Hints
•
Install your fax machine in a dust-free location away from
direct sunlight
•
Do not plug your fax machine into a power source shared
by equipment that produces electrical noise (e.g., air
conditioners).
•
Leave electronic adjustments to authorized service
personnel
•
The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the fax machine, do not plug your
fax machine into anything other than a standard RJ-11C
jack.
•
Your fax machine is intended to be grounded electrically
and is equipped with a three-wire grounded power cord.
For your safety, do not attempt to defeat your power cord’s
grounding plug.
•
The electrical outlet and phone jack should be installed
near the equipment and should be easily accessible.
•
The two TEL terminals on the back of the fax machine are
only suitable for 2–wire devices. Not all standard
telephones will respond to incoming calls when
connected to an extension jack.
•
This equipment may not necessarily provide for the
effective hand-over of a call from a telephone connected
to the same line.
•
The operation of this equipment on the same line as
telephone or other equipment with audible warning
devices (such as call waiting) or automatic ring detectors
may cause false tripping of the ring detector.