Konica Minolta Fax 9930 - Manual (Page 168)

|
User’s Manual 153
Pulse Dial Rate
Speed Access no. 46
If the machine is set to Dial Pulse, this function controls the
rate of the dialing pulses (which vary by country).
Available settings are 10, 16 and 20 pps.
The default setting is MF (Modulated Frequencies).
See “Setting Basic Features, Dial and Incoming Call
Parameter Settings.”
Pulse Make Ratio
Speed access no. 47
If the machine is set to Dial Pulse, this function controls the
make rate of the dialing pulses.
Available settings are 33, 39 and 40%.
The default setting is 39.
Pulse Dial Type
Speed access no. 48
If the machine is set to Dial Pulse, this function controls the
type of pulse dialing it uses. Types of pulse dialing vary by
country.
Available settings are N, 10-N and N+1.
The default setting is N.