Lexmark 5300 User Manual
Page 128
R
EMOVE
TAPE
ON
CARTRIDGES
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
1
2
3
Reinsert the cartridges.
M
AKE
SURE
THE
PRINTER
IS
SET
AS
THE
DEFAULT
PRINTER
AND
IS
NOT
ON
HOLD
OR
PAUSED
To set printer as default
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2
From the Printer List dialog, select your printer.
3
Click the Make Default icon.
To resume print jobs
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2
From the list of printers, double-click your printer.
3
From the printer pop-up menu, click Start Jobs if you want to resume all print jobs in the queue; if you want
to resume a particular print job, select the document name, and then click Resume.
R
ECONNECT
THE
POWER
SUPPLY
1
Press
to turn off the printer.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press
to turn the printer back on.
Troubleshooting
128