Lexmark 5300 - Manual (Page 164)

S
AVE SETTINGS
If you press to select a setting, an * appears next to the selected setting.
Resetting the printer to factory default settings
You can reset your printer to the original settings without using the printer menus.
Note: Resetting to factory default settings will delete all printer settings you selected, including Speed Dial and Group
Dial numbers. If you want to print out those numbers before you reset the printer, see “Using the Phone Book” on
page 57.
1 Press , , and Start Color at the same time.
Warning—Potential Damage: Do not release the buttons until Language appears on the display, indicating
that the printer has been reset.
2 Follow the prompts on the display to choose your language, country or region code, date, time, and fax number.
Notes:
• To reenter your Speed Dial or Group Dial numbers using the computer, see “Customizing settings using the
Fax Setup Utility” on page 64.
• To reenter your Speed Dial or Group Dial numbers using the control panel, see “Using the Phone Book” on
page 57.
Related topics:
• “Using the control panel” on page 88
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to remove and reinstall the printer software.
1 Close all open software applications.
2 From the Finder desktop, double-click the Lexmark 5300 Series folder.
3 Double-click the Uninstaller icon.
4 Follow the instructions on the computer screen to remove the printer software.
5 Restart the computer before reinstalling the printer software.
6 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Related topics:
• “Installing the printer software” on page 97
Troubleshooting
164