Lexmark 5300 - Manual (Page 157)

Memory card reader and PictBridge troubleshooting
Memory card cannot be inserted
These are possible solutions. Try one or more of the following:
C
HECK MEMORY CARD TYPE
Make sure that the type of memory card you are using can be used in the printer.
C
HECK MEMORY CARD PLACEMENT
Make sure you have inserted the memory card in the correct slot.
Nothing happens when memory card is inserted
These are possible solutions. Try one or more of the following:
R
EINSERT THE MEMORY CARD
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
C
HECK MEMORY CARD PLACEMENT
Make sure you have inserted the memory card in the correct slot.
C
HECK MEMORY CARD TYPE
Make sure that the type of memory card you are using can be used in the printer.
C
HECK TO SEE IF THE MEMORY CARD IS DAMAGED
Check that there is no obvious damage to the memory card.
C
HECK TO SEE IF THE MEMORY CARD CONTAINS PHOTOS
Insert a memory card that contains photos. The printer will read photos created using the JPEG format. For more
information, see the documentation that came with the digital camera.
M
AKE SURE THE
USB
CABLE IS CONNECTED
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked
with the
USB symbol.
Troubleshooting
157