Lexmark 5300 User Manual
Page 130
M
AKE
SURE
THE
PRINTER
IS
RECEIVING
POWER
If the
light is not on, the printer may not be receiving power.
•
If necessary, press
to turn off the printer.
•
Plug the printer into a different electrical outlet.
•
If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.
•
Press
again to turn the printer back on.
M
AKE
SURE
THE
STICKER
AND
TAPE
ARE
REMOVED
FROM
THE
CARTRIDGES
1
Lift the scanner unit.
2
Remove the print cartridges from the print cartridge carrier.
3
Make sure the sticker and tape are removed from the bottom and back of the print cartridges.
M
AKE
SURE
THE
CARTRIDGES
ARE
PROPERLY
INSTALLED
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge,
make sure it is properly installed in the right carrier. If you are using a black cartridge or photo cartridge, make sure
it is properly installed in the left carrier.
For more information, see the related topic below.
M
AKE
SURE
THE
L
EXMARK
PRINTER
DRIVER
IS
SET
AS
THE
DEFAULT
PRINTER
AND
IS
NOT
ON
HOLD
OR
PAUSED
To set the printer as default
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility.
2
From the printer list dialog, select your printer.
3
Click the Make Default icon.
To resume print jobs
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility.
2
From the list of printers, double-click your printer.
3
From the Printer pop-up menu, click Start Jobs if you want to resume all print jobs in the queue; if you want
to resume a particular print job, select the document name, and then click Resume.
C
HECK
YOUR
USB
CONNECTION
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
USB symbol.
Troubleshooting
130