Lexmark 5300 - Manual (Page 71)

Understanding the PictBridge menu
The PictBridge default settings menu lets you select printer settings if you do not specify those settings from your
digital camera. For more information on making camera selections, see the documentation that came with your
camera.
1 Connect a PictBridge-enabled digital camera to the printer.
a Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
b Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: The PictBridge port is marked with the PictBridge symbol.
The message PictBridge camera detected. Press to change settings. appears on the
display.
2 Press or repeatedly until the menu item you want appears.
3 Press .
4 Press or repeatedly until the submenu item you want or the setting you want appears.
5 Press .
Note: Pressing selects a setting. An * appears next to the selected setting.
6 To go into additional submenus and settings, repeat step 4 and step 5 as needed.
7 If necessary, press repeatedly to return to the previous menus and make other setting selections.
Menu Item Action
Paper Size 1, 2 Specify the size of paper loaded.
Photo Size 1, 2 Specify the size of printed photos.
Layout 1 Center one photo on a page, or specify the number of photos to print on a
page.
1 Setting will return to factory default setting when the PictBridge-enabled digital camera is removed.
2 Setting must be saved individually. For more information, see “Saving settings” on page 95.
Working with photos
71