Printing photos using color effects – Lexmark 5300 User Manual

Page 74

Advertising
background image

4

Press

.

5

Press

or

repeatedly until Photo Number appears.

6

Press

.

7

Use the keypad to enter the number of the photo you want to print.

Use the proof sheet to identify the number of a photo.

Note: If you want to erase or change the number of the photo you entered, press

. This will work if you did

not press

after entering the number of the photo.

8

Press

to select a photo.

9

If you want to select additional photos, use the keypad to enter the number of the photo you want to print, and
then press

.

10

Press Start Color or Start Black.

11

Press Start Color or Start Black again.

Related topics:

“Printing photos stored on the memory device using the proof sheet” on page 72

“Loading paper” on page 6

Printing photos using color effects

You can use the control panel to apply color effects to your photos.

Note: You can also print photos with color effects using a proof sheet. For more information, see “Printing photos
stored on the memory device using the proof sheet” on page 72.

1

Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.) For more information, see “Loading paper” on page 6.

2

Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting
a memory card” on page 67 or
“Inserting a flash drive” on page 68.

3

Press

or

repeatedly until Photo Effects appears.

4

Press

.

5

Press

or

repeatedly until the color effect you want appears.

Note: Color effect selections include Sepia, Antique Grey, and Antique Brown.

6

Press

.

Note: The color effect applies to all the photos you print until the active memory card or flash drive is removed.

Related topics:

“Using the control panel” on page 88

Working with photos

74

Advertising