Panasonic KX-FM220 - Manual (Page 17)

17
Quick Start
B
a
s
ic
o
p
e
ra
tio
n
s
For Assistance, Call 1-800-435-7329
Answering voice calls
1 When the unit rings, press (DIGITAL\SP-PHONE)
or lift the handset.
2 When finished, press (DIGITAL\SP-PHONE) or
hang up the handset.
(DIGITAL\SP-PHONE)
(START/COPY/SET)
Handset
(VOLUME)
Ringer volume
Press (VOLUME) ( ’ / ‘ ) while the unit is idle.
¡ 4 levels (high/middle/low/off) are available.
To turn the ringer off:
1. Press
(VOLUME) ( ’ ) repeatedly.
¡ The following messages will be shown
alternately:
Display:
2. Press (START/COPY/SET) .
While the ringer volume is set to off:
The display will show the following message and the
unit will not ring when receiving a call:
When receiving a call, the unit will not ring, but will
show the following message:
INCOMING CALL
RINGER OFF
YES: PRESS SET
RINGER OFF= OK?
Caller ID capability
This unit is compatible with a Caller ID service offered
by your local telephone company. To use this feature,
you must subscribe to a Caller ID service.
Caller ID allows you to view the name or telephone
number of the caller before you answer the call. The
calling party information (name has priority) will be
displayed after the first ring.
By using Caller ID, you have the option of whether or
not to answer the call depending on the caller.
The unit also keeps the caller’s information and prints a
list automatically after every 35 calls.
¡ To set this feature, see page 73.
¡ To print out the caller list manually, see page 70.
Important:
¡ When you subscribe to a Caller ID service,
set the ring count settings to 2 or more rings:
— ANS/FAX mode ring count (p. 54),
— FAX (FAX ONLY) mode ring count (p. 55)
and
¡ — TEL/FAX mode ring count (p. 56).