Panasonic KX-FM220 - Manual (Page 74)

74
Preparation
Connecting to a computer
To run the Multi-Function Center software, you need the following software and hardware.
¡ IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended).
¡ Microsoft Windows 3.1, 3.11 or Windows 95.
¡ Hard Disk drive with at least fourteen (14) MB of available storage.
¡ RS232C Serial Port.
Features
The Multi-Function Center is an application that allows you to use your facsimile unit as a printer, scanner and
copier with Windows.
Printer functions
¡ Printing documents from a Windows application (See page 76.)
¡ Printing received documents (See page 82.)
Fax functions
¡ Faxing from a Windows application (See page 78.)
¡ Faxing a document on the facsimile unit (See page 83.)
¡ Viewing received faxes on the PC screen (See page 81.)
Scanner functions
¡ Scanning and saving documents (See page 85.)
*To order a KX-FA180, call toll free 1-800-332-5368.
The RS232C (DB9 Female/DB25 Male) serial cable can also be purchased at a
computer supply store. If you need help finding the correct cable, call 1-800-435-7329.
KX-FA180 or a RS232C cable
(not included)
Multi-Function Center
To COM port 25 Pin Male
25 Pin Adaptor
9 Pin Female
OR