Panasonic KX-FM220 - Manual (Page 58)

58
Setting the dialing mode
If this feature is set to AUTO, the unit will automatically set the dialing mode to TONE or PULSE when the unit
is turned on.
If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below:
1 Press (MENU) .
Display:
2 Press K , then A C .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
5 Press (START/COPY/SET) .
6 Press (MENU) .
MODE=AUTO [ Ÿÿ ]
DIALING MODE
SYSTEM SET UP
Note:
¡ If you change the dialing mode setting to TONE or
PULSE, set the dialing mode again when you change
the line service.
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU) Dial keypad