Panasonic KX-FM220 - Manual (Page 71)

71
Special Settings
Setting the transmission report printing
One of the following choices is available:
ERROR: The transmission report will print out only when fax transmission fails.
ON:
The report will always print out, indicating whether fax transmission is successful or not.
OFF: The report will not print (pre-selected setting).
1 Press (MENU) .
Display:
2 Press K , then @ D .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
5 Press (START/COPY/SET) .
6 Press (MENU) .
MODE=OFF [ Ÿÿ ]
TX-REPORT MODE
SYSTEM SET UP
Setting the journal report to automatically print
This unit will automatically print a journal report after every 35 fax communications. After printing, the journal
report will still remain in memory and the oldest communication will be erased when a new communication
occurs.
When this feature is deactivated, the unit will store the records of the last 35 fax communications, but the unit
will not print the journal report automatically.
1 Press (MENU) .
Display:
2 Press K , then B B .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
5 Press (START/COPY/SET) .
6 Press (MENU) .
MODE=ON [ Ÿÿ ]
AUTO JOURNAL
SYSTEM SET UP
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU) Dial keypad
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU) Dial keypad