Panasonic KX-FM220 - Manual (Page 90)

90
¡ The fax function cannot be operated on the PC. The RS232C cable is not
connected correctly, or the software is not running on the PC.
¡ The unit is checking if the film is set correctly. Wait for a while.
¡ The other fax machine does not have a polling feature. Check with the other
party.
¡ The receiving unit is busy or ran out of recording paper. Try again.
¡ The document is jammed. Remove the jammed document (p. 98).
¡ Attempted to transmit a document longer than 600 mm (23 5 ⁄
8
w ). Press the STOP
button and remove the document (p. 98).
Divide the document into two or more sheets and try again.
¡ There is too much paper on the paper stacker. Remove the printed paper. If the
display message still remains after removing the paper, a paper jam may have
occurred. Remove the jammed paper (see “When paper has jammed near the
recording paper exit” on page 97).
¡ The starter film is empty. Replace the film or film cartridge with a new one
(p. 99, 100).
¡ A transmission error occurred. Try again.
¡ The unit is too hot. Let it cool down.
DISPLAY MESSAGE CAUSE & REMEDY
REMOVE DOCUMENT
TRANSMIT ERROR
STARTER FILM END
UNIT OVERHEATED
REMOVE PRINTOUT
REDIAL TIME OUT
POLLING ERROR
Error messages on the display
(cont.)
PLEASE WAIT
PC FAIL OR BUSY