Panasonic KX-FM220 - Manual (Page 46)

Transferring incoming call messages
(cont.)
46
1 2 3
4 5 6
7 8 9
0
1 Press (MENU) .
Display:
2 Press K , then F @ .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
MESSAGE: transfers incoming messages.
PAGER:
calls your pager.
OFF: turns off this feature.
5 Press (START/COPY/SET) .
6 a: If you selected “MESSAGE” in step 4:
Enter the transfer telephone number.
b: If you selected “PAGER” in step 4:
Enter your pager number.
b: ¡ If this feature does not work properly, press
(REDIAL/PAUSE) more than once at the end
of your pager number to extend the paging
time.
b: ¡ If you wish to display a message on your
pager, enter the message after your pager
number and
(REDIAL/PAUSE) .
Programming methods may vary depending
on the pager company. Call your pager
company for details.
b: ¡ You may enter a total of 46 digits and/or
pauses.
7 Press (START/COPY/SET) .
8 Press (MENU) .
NO.=
MODE=OFF [ Ÿÿ ]
MESSAGE TRANSFER
SYSTEM SET UP
Note:
¡ This feature can be turned on/off remotely from a
touch tone telephone (see page 51).
(MENU)
(START/COPY/SET)
Dial keypad
(REDIAL/PAUSE)
Setting the message transfer/pager call