Primera Technology Cyclone C-1000 - Manual (Page 12)

8 Getting Started
The factory default parameters of the serial port are:
Speed (baud rate) 9600
Data format 1 start bit, 8 data bits and
1 stop bit.
Parity None
Handshaking XON/XOFF as well as
(Flow control) RTS/CTS
Notes: 1. It is not necessary to change any switches or send any commands
for the parallel and serial port selection. The printer can
automatically detect it.
2. The default settings can also be read from the self- test page.
510172_r1.qxd 3/21/2001 6:25 PM Page 8