Primera Technology Cyclone C-1000 - Manual (Page 22)

Using the Label Dr.
Paper
Select the paper size appropriate to the labels or tags you have
installed. In most cases, it is easiest to select Custom and enter
your own label height and width.
Or, select the label size from the list of pre-formatted sizes. The
selected label size may be a little higher than that of the
physical label.
Orientation
Set portrait or landscape according to the print direction.
Paper source
Select one of the following items:
T/T & Media with Gap
T/T & Media with Black Line
T/T & Continuous Media
D/T & Media with Gap
D/T & Media with Black Line
D/T & Continuous Media
T/T stands for thermal transfer (ribbon) mode and D/T for
direct thermal mode (without ribbon).
Media choice
Set the heat value or darkness from this field. The darkness
value ranges from 0 to 15.
18 Using the Printer with Windows
510172_r1.qxd 3/21/2001 6:25 PM Page 18