Primera Technology Cyclone C-1000 - Manual (Page 36)

32 Command Language Quick Reference
(Table continued from previous page)
Command Description Parameter
Ip1,p2,001 Select symbol set** p1: 7 or 8 data bits
p2: symbol set
JB Disable back feed**
JF Enable back feed**
LEx,y,hlen,vlen Line draw by hlen: horizontal length
exclusive vlen: vertical length
LOx,y,hlen,vlen Line draw by OR
LWx,y,hlen,vlen Draw white line
N Clear frame buffer
O[,C][,N][,D] Select options
Pp1[,p2] Print label p1: label set number
p2: copy number of
each label
PAp1[,p2] Print automatic
Qp1,p2[,+p3] Set label and p1: label length
gap length** p2: gap length
p3: offset length
Qw Set label width** w: label width
Rx,y Set origin point**
Sp1 Set print speed p1: speed value, 2~4
U Print configuration
UN Disable Error Report
US Enable Error Report
Vvn,dn,just,string Define variable vn: variable index
dn: digit number
just: L,R,C and N
for field
justification
Xx,y,thick,ex,ey Draw box ex, ey: end position
thick: line
thickness
ZT Set print direction ZS: print from top
ZB ZB: print from bottom
ZS Enable/disable power-on default is
ZN store-to-Flash++ ZN(disabled)
? Download variables
or counters
d1,hadj Set horizontal posi- hadj: adjustment in
tion adjustment** dots.
d2,hadj Set horizontal same as d1, except it is
position no saved to E 2 PROM
adjustment
510172_r1.qxd 3/21/2001 6:25 PM Page 32