Primera Technology Cyclone C-1000 - Manual (Page 23)

Using the Printer with Windows 19
Copies
This selection designates the number of printed copies of each
page.
More Options
To use the cutter and peeler function you need to enter More
Options and select one of the items:
w/o Cutter and Peeler (default)
Cutter Enabled (a cutter is not currently available for the
C-1000 or C-1000P)
Peeler Enabled
Device Options
Set the print speed. The speed is from 1 to 4 IPS.
After the driver is installed, you can open the Label Dr. 200
dialogue box and make parameter settings through the same
paths as mentioned above:
Windows 95/98/Me/2000/NT4.0 - Start > Settings > Printers
> Label Dr. > Properties
510172_r1.qxd 3/21/2001 6:25 PM Page 19