Primera Technology Cyclone C-1000 - Manual (Page 31)

Command Language Quick Reference 27
Note: Control codes for the printer commands.
Symbol Code (hexadecimal)
XON 11H
XOFF 13H
STX 02H
SOH 01H
ESC 1BH
LF 0AH
CR 0DH
Note: There is no space code in each command.
System Level Commands
Command Description Remarks
<STX>a Enable page/job
echo characters
<STX>cxxxx Set continuous
paper length and
disable edge sensor
<STX>Dxxxxxxx Memory dump** xxxxxxx : memory
address in HEX value
<STX>Exxxx Set copy count for
stored label
<STX>e Enable edge sensor
<STX>F Feed a page
<STX>fxxx Back feed from top
position
<STX>G Print stored label
<STX>I Download graphics either PCX, BMP, PCX
or HEX format
<STX>J Set pause for each
label
<STX>j Cancel pause
<STX>KQ System configuration
details
<STX>L Enter label formatting
state
<STX>Mxxxx Set maximum label
length
<STX>m Set measurement in
metric
<STX>n Set measurement in
inches
510172_r1.qxd 3/21/2001 6:25 PM Page 27