Primera Technology Cyclone C-1000 - Manual (Page 35)

Command Language Quick Reference 31
B. COMMAND SET FOR PPLB
The following commands are for Printer Programming
Language B.
All PPLB commands must be ended with <LF> or <CR>+<LF>
codes. No spaces are allowed between parameters and leading
command character.
Command Description Parameter
Ax,y,rot,font,hm, Print text. font: 1 ~ 5 for internal
vm,nr,string font and A ~ Z
for soft font.
Bx,y,rot,bar,nw, Print Bar Code. nw: width of narrow
ww,v,hum,string bar: barcode selection bar
ww: width of wide bar
v: bar code height
hum: B for printing
readable code and
N for disabling.
bx,y,type,[ ] Print 2D Bar Code type: M for Maxi code
and P for PDF 417
Ccn,dn,just,step,string Counter declaration cn: counter index
dn: digit number
just: L,R,C and N for
field justification
step: step value
Dp1 Heat setting p1: density, 0 ~ 15
EI Print soft font names
Ekstring Delete soft font string:soft font name or
“*” to delete all
soft fonts
ESstring, . Download soft font
FE End form store
FI Print form names
Fkstring Delete form string:form name or “*”
to delete all forms
Fsstring Execute form string:form name
Fsstring Save form string:form name
GGx,y,string Print graphics string:graphic name
GI Print graphic list
Gkstring Delete graphics string:graphic name or
“*” to delete all
graphics
GMstring,size<LF> Store graphics string:graphic name
size: graphic size
in byte
510172_r1.qxd 3/21/2001 6:25 PM Page 31