Primera Technology Cyclone C-1000 - Manual (Page 20)

16Using the Printer with Windows
Driver Installation
• Start Windows.
• Insert the printer driver CD-R (for Win 95/98/Me/2000 or
NT) into your CD-ROM drive.
• For Windows 95/NT4.0:
- Click the “Start” button.
- Select “Settings”, then “Printers”
- Double click the “Add Printer” icon. Click “Next”
- Specify the “Network” or “Local” button and click the
“Next” button.
- Select “Have Disk”, enter the CD-ROM drive and path,
e.g. D:\Cyclone Drivers.
- The driver name “Label Dr. 200 will appear in the
“List of Printers.” Click “Next.”
- Select your desired operating system, e.g. WIN98.
Click “OK”.
- Click “OK” again if necessary.
- Select the communication port for the label printer. For
select "LPT1:", "LPT2:" or "LPT3", for serial port select
"COM1:" or "COM2:".
- After the related files have been copied to your system,
the procedure is complete.
- If you need to print from the label printer you should
set "Label Dr. 200" as the Default Printer.
Note: If you are just updating your driver, make sure to delete the previous
version first.
B. HOW TO USE THE DRIVER
After the driver is installed, you can open the Label Dr. 200
dialogue box and make parameter settings through the same
paths as mentioned above:
1. Windows 95/NT4.0 - Start > Settings > Printers > Label Dr.
> Properties
510172_r1.qxd 3/21/2001 6:25 PM Page 16