Network Instruments GigaStor 114ff - Manual (Page 110)

Using the Observer console locally on the GigaStor
Chapter 7 Observer on the GigaStor 110
rev. 1
5 Choose Options → Switch between Observer and Expert Probe
Interface.
The Choose Program Interface window opens.
6 Choose Observer and click OK. You must close Observer and
restart it to switch into the console interface. Click OK on the
message dialog.
7 Click Start → Programs → Observer → Observer to open the
console interface.
T IP ! S WITCHING
BACK TO E XPERT
P ROBE
In Observer, choose View → Switch between Observer and
Expert Probe Interface.
After the Expert Probe interface is open, choose Options →
Probe Options to select the Run Probe as Windows Service
option. You must manually start Network Instruments Expert
Probe from the Windows Service Control Manger. It may take
a moment before the service starts. You may need to restart
the GigaStor for the setting changes to fully set.