Network Instruments GigaStor 114ff - Manual (Page 85)

WAN Load by DLCI
Chapter 5 Using Observer with a WAN Probe
85
rev. 1
Figure 55 WAN Load by DLCI
The WAN Load by DLCI mode can be viewed as a dial, graph, or list
display. Except for list view, there are no setup options for WAN Load
by DLCI mode. Every view includes a dropdown box that lets you
select which DLCI you want to monitor.
Figure 56 WAN Load by DLCI Dial View
The WAN Load by DLCI mode in dial view shows transfer rate, CRC
error rate, FECN/BECN frame rates graphed on dial meters.
For encapsulations that do not use DLCI (such as X.25), the correct
address value is shown even though it is still labeled DLCI.