Network Instruments GigaStor 114ff - Manual (Page 88)

Triggers and Alarms
Chapter 5 Using Observer with a WAN Probe 88
rev. 1
Figure 59 Active Filters
Triggers and Alarms
WAN Observer adds WAN-related criteria to the standard Triggers
and Alarms mode.
1 Click the Alarm Settings button located in the lower left corner of
Observer’s main window.
Figure 60 Alarm Settings
A dialog appears that allows you to select the probe or probes for
which you want to set alarms.
2 Check the probes you wish to set.
3 Select an probe for which you want to set alarms and then click
the Selected Instance Alarm Settings button. Figure 61 appears.