Network Instruments GigaStor 114ff - Manual (Page 32)

Configuring Observer for your Gigabit device
Chapter 2 Installing Your GigaStor 32
rev. 1
Figure 19 Gigabit tab
Configuring Terms of Service and Quality of Service settings
The ToS/QoS settings are configured for each probe.
1 Select the gigabit probe and right-click. A menu appears. Choose
Probe or Device Settings.
2 Click the ToS/QoS tab (Figure 20).
3 Specify the IP precedence bits for the terms of service/quality of
service for your network.