Network Instruments GigaStor 114ff - Manual (Page 25)

Connecting Observer to the GigaStor
Chapter 2 Installing Your GigaStor
25
rev. 1
1 Click Probe Administration (see Figure 7). The Probe
Administration Login window opens.
Figure 10 Remote Probe Administration
2 Ensure “Login using a user account configured for this Probe” is
selected and click OK.
The Probe Administration window opens to the Memory
Management tab (Figure 11).
Figure 11 Memory Management tab
3 Select the Network 1 probe instance and click Rename. Choose a
name that is meaningful to you for the probe instance name and
click OK. By default, Network 1 is your active probe instance for
your GigaStor. For details about active and passive probe instance,
see “Probe Instances” on page 111.