Network Instruments GigaStor 114ff - Manual (Page 122)

Viewing the Gen2 card’s properties and finding the board’s ID
Chapter 9 Gen2 Capture Card 122
rev. 1
This tab shows all active physical ports on the Gen2 card and the
board’s ID. The “Interrupt enabled” and “DMA enabled” lights are
light green when Observer is running and dark green when
Observer is not running.
C AUTION A DVANCED
S ETTINGS T AB
Do not make any changes to the settings on the Advanced
Settings tab unless directed by the Support department! The
DMA buffer size and DMA copy size are optimized at the
factory for your specific motherboard and Gen2 card.