Nortel Networks M760 - Manual (Page 11)

Description
3
To find out
the system's
software version The availability of certain functions described in this guide
may depend on the version or configuration of your system.
We would advise you to carry out the following test (after
connecting the set) to find out the version of the system
to which your set is connected.
- Press the key.
Either the display shows the following:
The indications and additional features which are highlighted
on a blue background are relevant to you in particular.
Otherwise:
The features highlighted on a blue background in this guide are
not available with your current system version.
If you are
in any doubt,
consult your
system operator.
WHICH DIRECTORY DO YOU WANT TO CONSULT?
Private Abbrev. Log Info -->
DIAL THE ABBREVIATED NUMBER: _
< -Start
Do not install the equipment in a damp room or near a water
outlet.
The equipment must be used at a temperature between 5 °C
and 45 °C.
This equipement can not be connected to the public network.
This equipment is designed to be installed with a private swit-
ching system of NORTEL NETWORKS M6500 IP PBX and
SUCCESSION CSE 6500 ranges.
The voltage on this network is classed TNV1 (Telephone Net-
work Voltage) according to standard EN 60-950.
This certifies the conformity of the equipment with the
regulations which apply in accordance with the directive
R & TTE 1999/5/EC.
Use a cloth which has been dampened in slightly soapy water,
and then wipe with a dry cloth.
Your equipment will retain its new appearance if you do not
use any solvents or household cleaning products.
Recommendations and safety
Caution
Telephone
connection
CE marking
Maintenance