Nortel Networks M760 - Manual (Page 28)

Receiving a call
20 * Depending on the features provided by your system operator.
Answering a call
from a correspondent
in the private directory:
Divert
1 - Press the Divert interactive key.
2 - Then dial the extension number to which you want to
divert the call.
Note: you can also search an internal name or use the
pre-programmed keys.
The set will no longer ring and the "Message" lamp will
extinguish.
Diverting a call to another extension
- Pick up the handset.
The conversation with the caller will take place in discreet
mode.
Or
- Press the
key or the green key .
You can hold a conversation directly in hands free mode,
without off-hooking the handset.
When you off-hook the handset or you press the key or the
green key, the display shows the number associated with
the correspondent name.
Notes:
. If your set is in intercom mode, you need not perform any
action in order to talk to the internal correspondent calling you.
. Any call not answered within a given time interval is
switched automatically to the attendant*.
Answering a call
- Press the red key.
The set will no longer ring; however, the Message lamp will
continue to flash, to report that you have an incoming call.
The set will ring again the next time an incoming call is received.
Silencing ring tone
When your set is called, you can decide to silence the ring tone for this call only.
Suppose you want to divert a call to another extension without answering it.