Nortel Networks M760 - Manual (Page 26)

Dialing a correspondent
18
Notify
Enter
More
The number is busy or does not answer,
- press the
Redial interactive key (before hanging up).
When the correspondent is no longer busy (if he was busy) or
has re-activated the phone (if he was absent), your telephone
set will ring. When you pick up the handset, your correspon-
dent's telephone set will be redialed and ring.
Using the automatic redial function
1 - Press the Notify interactive key.
The display shows the first of the 6 pre-defined messages.
2 - Press the More interactive key successively to select
another pre-defined
message - if desired - or to select a blank message entry.
. Depending on the choice you make, you will either have to
complete the message shown, or enter a new message
via the alphabetic keypad.
Note: use the alphabetical keypad and its features.
. If you need to correct an entry, press the Erase interactive key.
3 - Press the Enter interactive key to send the message.
The display prompts you to get back the communication.
4 - Press the Yes or No (example) interactive keys, as desired.
Notes: the pre-defined messages are displayed directly on the
notified corresponden’s set. However, a new message is not
displayed directly: the other correspondent is informed of the
arrival of a writted message, and must choose to read it.
Notifying the correspondent
If the correspondent you are calling does not answer:
Redial
Erase
Suppose you are calling an internal number, and that the number concerned is busy or does not
answer. You can set the number to be called back automatically.
Suppose the correspondent you are calling does not answer. You can send a short message to
the display of his/her telephone set, provided that the said correspondent (internal or external)
is connected to a digital interface.
Desabling Redial
Function If you want to disable the automatic redial function.
- Press
Funct. , Feature , --> , Memory , Call bk interactive
keys.
The display shows the memorised number.
- Press the
Cancel interactive key to desable the redial function.
Enabling automatic
redial:
Cancel
No