Nortel Networks M760 - Manual (Page 89)

Settings
81
1 - Press the key.
The display shows " PROGRAMMING".
2 - Press twice the key.
The display indiactes “ DIRECTORIES MANAGEMENT”.
3 - Press the key.
The display shows the first selection of «BY DEFAULT SEAR-
CH FROM DIR? Private».
4 - Press the interactive key corresponding to the desired list:
Private - Int.Name - Ext. Name (Int.Name: for example).
Depending on the choice made, the direct call on the keypad
is from the private directory or from the shared directory of
internal names or from the shared directory of external names.
Associating a directory with direct keypad call
You can choose the directory associated with the direct keypad call (refer to section on Dia-
ling a correspondent from the directories by name).
This setting is used to choose the language in which internal
messages of the set are displayed.
1 - Press key.
The display indicates « PROGRAMMING».
Choosing the set
internal messages lan-
guage:
Int.Name
Choosing the display language
Messages broadcast by the display are from two sources: messages from the set and messages
specific to the associated system.
If your set is installed with a recent version system, you have access to only one menu.
The language synchronization is supplied automatically by the system.
Otherwise, a specific menu will let you choose the language in which messages from the set
are displayed.