Nortel Networks M760 - Manual (Page 20)

12
Dialing methods
Using the loudspeaker mode
Loudspeaker mode lets you listen to a correspondent through the loudspeaker and thereby
allow other people to take part in the conversation.
While you are in discreet communication (handset off-hooked).
-Press the
key.
The conversation will be broadcast over the loudspeaker.
The lamp associated with the key blinks and then illuminates
steadily.
Enabling loudspeaker
mode:
- Press the key again.
The conversation will continue in discreet mode. The lamp
associated with the key goes out.
Disabling loudspeaker
mode:
With the set idle.
- Press the
key to enable intercom mode.
The display shows the message "YOUR SET IS IN INTERCOM
MODE", and the lamp associated with the
key will blink.
. If an internal correspondent calls, you can hold a conversa-
tion directly without taking any action.
. To call an internal correspondent, dial the number directly
and speak when the called correspondent picks up the receiver.
When the called correspondent hangs up, the telephone will
return to intercom mode and the lamp of the
key will flash
again.
With the set idle.
- Press the
key.
You can also press the Cancel interactive key.
The lamp associated with the key goes out.
Using the intercom mode
The intercom mode lets you communicate with internal parties with no action required.
Enabling
intercom mode:
Disabling
intercom mode: