Nortel Networks M760 - Manual (Page 69)

The multiline function
61
1 - Press the key.
The display shows " PROGRAMMING".
2 - Press the key.
The display shows "WHAT DO YOU WANT TO PROGRAM?".
3 - Press the Key interactive key.
The display prompts you to select the desired programmable key.
4 - Press a programmable key.
The icon associated with this key illuminates steadily, and the
display shows the programming status of the said key.
5 - Press the Modify interactive key.
6 - Press the Superv. interactive key.
The display shows the message "WHAT DO YOU WANT
TO SUPERVISE?"
7 - Press the Extens. interactive key.
The display prompts you to supervise your extension
or another extension.
8 - Press the Yes interactive key to supervise your own set.
The display shows the number of keys already programmed
with supervision mode for this directory number.
9 - Press the Add interactive key to accept the new
programming.
The display confirms the programming of the key.
10 - Press the <-Start interactive key (to repeat the procedure
for the second directory number).
11 - Press another programmable key .
The display shows the programming status of the said key.
12 - Press the Modify interactive key.
Programming the multiline function
Key
Modify
Superv.
Extens.
Yes
Add
<-Start
Modify
Below is an explanation of how to program the supervision function for each of the two tele-