Nortel Networks M760 - Manual (Page 33)

During A Call
25
Shuttle
Recover
Conf.
- Press the Shuttle interactive key.
You can converse alternatively with each of the
correspondents, but they cannot converse with each other.
The correspondent shown on the right-hand side of the display
is always the one on hold.
Switching from one correspondent to another
- Press the Recover interactive key.
You recover the correspondent who was on hold.
Releasing one correspondent
- Press the Conf. interactive key.
A three-way conference call is set-up between you and your
two parties.
If one of them hangs up, you remain on-line with the other.
Suppose you want to leave your two parties to talk to each
other during the conference call:
- Press the Transfer interactive key.
You can also simply hang-up the handset or press the red
key .
The two parties remain on-line with each other.
Note: in the event of a failure, your telephone set rings again.
Setting-up a conference call
Terminating
the conference call:
Transfer
You want to switch from one correspondent to another.
You want to release one of the parties (the correspondent with whom you are talking).
You want to talk with each of the two parties at the same time (this feature is provided if you
have initiated one of the calls).