Nortel Networks M760 - Manual (Page 48)

The incoming calls log
40
Calling a correspondent from the incoming calls log
- Press the Call interactive key.
You can also press the green key or the key.
The set will automatically call the number and the display will
show the number called.
The record will remain saved in the log, but it will have the icon
in front of it to indicate that
the number has been called back.
Storing the name and/or the number in the private directory
Create
Call
While consulting the log, you can call the correspondent whose record is displayed.
Note: Only correspondents for whom a number is registered can be called.
While consulting the log, you can save the number (and possibly the name) of the correspondent
whose record is displayed, in your private directory.
1 - Press the Create interactive key.
The display prompts you to create the record within the directory.
2 - Press the key.
The name and number are automatically stored in the private
directory.
. If the correspondent’s name is not in the log.
The display prompts you to enter a name.
- Enter the correspondent’s
name .
Note: use the alphabetical key and its features (entry in upper
or lower case; entry of accented or special characters).
- Press the
key.
. If a number is already saved under another name in the private
directory, the display shows the message “ALREADY REGISTE-
RED”.
3 - Press the interactive key corresponding to the desired list
(such as List 1).
4 - Press the key to end.
The display returns to the incoming calls log record.
List 1
M A R T I N 0 9 / 0 6 1 1 : 0 0 A M
Call Delete Create