Nortel Networks M760 - Manual (Page 22)

There are several ways of dialing a correspondent, depending on whether the number is being
keyed-in for the first time or whether it is already stored within the set.
The call procedures for correspondents' numbers stored in the directories or logs are explained
in the sections covering these particular features.
When the called correspondent answers, you can use any of the modes described above.
Dialing a correspondent
14
To call an internal correspondent.
- Dial the correspondent's extension number .
The called correspondent's name is displayed*.
To call an external correspondent.
1 - Dial the access code for obtaining an external line (0).
2 - Dial the correspondent's number.
The number dialed is shown on the display.
When the correspondent answers, you can hold a conversation.
Dialing a correspondent
Dialing the number
M A R T I N F R E E
<- Start Redial Notify Memory
Calling an internal
correspondent:
Calling an external
correspondent:
X X X X X X X X X X I N P R O G R E S S
Comm Prenum Duratn. <- Start -->
- Press the programmed key.
The correspondent's number is automatically dialed.
The display shows the number of the correspondent called.
When the called correspondent answers, you can hold a con-
versation.
Using the programmable keys
Your telephone set's programmable keys can be assigned to the phone numbers of correspon-
dents that you call regularly (internal or external).
DUPONT
* Depending on the features provided by your system operator.
or
The keys of the numeric keypad are used to dial the number of the correspondent.